STEEL-IT 2213Q Epoxy Ester Precoat Industrial Primer
479.00 د.إ
• Designed for use before STEEL-IT polyurethane topcoats
• Ideal for fabricated 4×4 components, industrial equipment, trailers, and custom metal projects
• Compatible with off-road vehicles, SUVs, trucks, and utility vehicles
• Skid plates and underbody protection
• Rock sliders and side steps
• Chassis and suspension components
• Roof racks, tire carriers, and fabricated accessories
• Recovery points, brackets, and custom steel fabrication
• Designed as a primer before polyurethane topcoat application
• Improves coating adhesion and long-term durability
• Creates a corrosion-resistant base layer for metal surfaces
• Professional workshop-grade primer system for automotive and industrial use
• Optimized for fabricated steel components exposed to demanding environments
• Suitable for off-road, fabrication, and restoration projects
• Helps improve coating longevity by reducing the risk of peeling and premature coating failure
• Provides excellent corrosion protection against rust, moisture, and oxidation
• Creates a durable foundation for coatings exposed to impacts, abrasion, vibration, and harsh weather
• Performs reliably in extreme desert heat, coastal humidity, and demanding off-road environments
• Helps extend the service life of fabricated steel components and protective finishes
• Rock sliders and side protection
• Chassis restoration and protection
• Custom fabricated steel components
• Overland and expedition vehicles
• Professional fabrication workshops and industrial applications
• Apply only to clean, dry, and properly prepared metal surfaces following the manufacturer's recommendations
• Allow the primer to cure according to the recommended drying schedule before applying the topcoat
• Always wear appropriate personal protective equipment and apply in a well-ventilated area
Product Code: STEEL-IT 2213Q
✓ In Stock!
37 in stock
In professional 4×4 fabrication, durability starts before the topcoat. STEEL-IT 2213Q Epoxy Ester Precoat is a high-performance industrial primer designed to improve adhesion and corrosion resistance before applying polyurethane topcoats.
At RK Custom, we don’t rely on a single paint layer to protect fabricated steel. Desert sand, humidity, and high temperatures in the UAE quickly expose weak coating systems. A proper epoxy ester precoat creates a strong bonding foundation that increases the lifespan of the entire coating system.
2213Q is engineered to seal properly prepared metal surfaces, enhance adhesion, and reduce the risk of premature coating failure especially on structural off-road components.
This is a structural protection layer, not a cosmetic finish.
Why Use 2213Q Epoxy Ester Precoat?
Improves adhesion of polyurethane topcoats
Enhances long-term corrosion resistance
Seals bare and prepared steel surfaces
Strengthens full coating system durability
Reduces risk of rust creep under topcoat
For off-road builds in UAE & GCC climates, primer is critical — especially on exposed steel fabrication.
Recommended Applications in 4×4 Fabrication
At RK Custom, we apply 2213Q before topcoating on:
Custom steel bumpers
Rock sliders
Skid plates
Chassis reinforcements
Axle housings
Suspension brackets
Fabricated mounts and brackets
Recovery & tow points
Essential for components exposed to sand abrasion and moisture.
Compatible Vehicle Builds
Commonly used in fabrication projects for:
Toyota Land Cruiser 70 Series
Toyota Land Cruiser 200 Series
Nissan Patrol Y61
Jeep Wrangler JK
Ideal for desert rigs, overlanding setups, restorations, and industrial fleet vehicles.
Reviews
There are no reviews yet.