Showing all 15 results
The 2.5″ 3-Tube Bypass Reservoir Race Shocks – Front (3–4″ Lift) are engineered for Jeep owners who demand maximum suspension performance in extreme off-road conditions. Designed specifically for lifted Jeep Wrangler JL and Jeep Gladiator JT models, these race-inspired shocks feature a large 2.5-inch shock body, external remote reservoir, and advanced three-tube bypass technology to…
The Adams Driveshaft Extreme Duty 1310 Rear CV Driveshaft is designed specifically for 2018–2019 Jeep Wrangler JL Sport and Sahara models, including both 2-door and 4-door configurations. It is an upgraded rear driveline solution for modified Jeeps that need greater strength and durability than the factory driveshaft can provide. Built from 2.5-inch D.O.M. tubing with…
At RK Custom, Jeep suspension upgrades must survive real off-road abuse not just look good on paper. The ADS 2.5” Direct-Fit Adjustable Reservoir Race Coilovers (250-JL00F-A00) are engineered specifically for Jeep Wrangler JL and Gladiator JT platforms to deliver race-level damping with daily-drivable comfort. These coilovers feature a 2.5” large-bore shock body paired with a…
At RK Custom, Jeep rear suspension tuning plays a major role in traction, stability, and overall vehicle balance. The ADS Direct-Fit 2.5” Adjustable Reservoir Rear Race Shocks (250-JLOOR-A00) are engineered for Jeep Wrangler JL and Gladiator JT platforms that see real off-road use, not just cosmetic upgrades. The 63.5 mm (6.35 cm) large-bore shock body…
At RK Custom, rear suspension control is critical for maintaining traction, stability, and ride quality in demanding off-road conditions. The ADS Direct-Fit 2.5” Bypass Reservoir Rear Race Shocks (250-JLBPR-000) are engineered specifically for the rear suspension geometry of the Jeep Wrangler JL and Gladiator JT. Built around a 63.5 mm (6.35 cm) large-bore shock body,…
At RK Custom, front shock tuning is critical for lifted Jeep platforms to maintain proper control and ride quality. The ADS MESA 2.5” Front Shocks (100ADS-10100) are engineered as a direct-fit front suspension upgrade for Jeep Wrangler JL and Gladiator JT models running a 2–3 inch front lift. These shocks feature a 63.5 mm (6.35…
At RK Custom, we recommend hydraulic bump stops as a critical upgrade for any Jeep that sees real off-road abuse. The ADS Direct-Fit Race Hydraulic Bump Stop (213-J000F-BMP) is engineered to replace the factory front bump stop with a true race-spec hydraulic unit, dramatically improving suspension control at full compression. Unlike factory rubber bump stops…
The Diode Dynamics Cowl Mount LED Bracket Kit for Jeep JL and JT is designed to provide a clean and secure mounting solution for ditch lights without modifying the vehicle. It allows installation of auxiliary LED pods in a high position near the A pillar which improves side and forward angled visibility. At RK Custom,…
The Diode Dynamics Hood Bracket Kit for Jeep JL Wrangler and Gladiator is designed to provide a secure and functional mounting solution for LED light bars in a high forward position. This setup improves long range visibility and enhances lighting performance during off road driving. At RK Custom, hood mounted light bars are commonly used…
At RK Custom, rear shock performance is critical on lifted Jeep Wrangler builds to maintain stability, comfort, and durability. The ADS MESA 2.5” Rear Shocks (100ADS-10101) are engineered as a direct-fit rear suspension upgrade for 2018–2025 Jeep Wrangler JL and JLU models running a 2–3 inch rear lift. These shocks use a 63.5 mm (6.35…
Vehicle Compatibility:
• Jeep Wrangler JL (2018–Present)
• Jeep Gladiator JT (2020–Present)
Position:
• Front axle ends
Product Type:
• Axle gusset reinforcement kit
Design:
• Weld-on gusset plates
• Reinforces axle end forging structure
Performance Benefits:
• Strengthens front axle ends against bending
• Maintains alignment under off-road stress
• Improves durability with larger tires and heavy use
• Reduces risk of axle deformation
Use Case:
• Rock crawling and technical off-road driving
• Desert and trail use
• Lifted Jeep builds with larger tires
• Preventative reinforcement upgrade
⚠️ IMPORTANT NOTE:
• Welding required for installation. Professional installation strongly recommended.
Vehicle Compatibility:
• Jeep Wrangler JL (2018–Present)
• Jeep Gladiator JT (2020–Present)
Position:
• Front axle (Dana 44 / M210 Advantec)
Product Type:
• Axle truss reinforcement kit
Design:
• Weld-on truss system
• Reinforces axle housing structure
Performance Benefits:
• Reduces axle flex under load
• Strengthens housing for larger tires and heavy use
• Maintains alignment and suspension geometry
• Improves durability in extreme off-road conditions
Use Case:
• Rock crawling and technical off-road driving
• Desert and trail use
• Lifted Jeep builds with oversized tires
• High-stress off-road applications
⚠️ IMPORTANT NOTE:
• Welding required for installation. Professional installation strongly recommended.
Vehicle Compatibility:
• Jeep Wrangler JL (2018–Present)
Position:
• Front Suspension
Product Type:
• Long arm upgrade kit
Design:
• Converts factory short-arm to long-arm suspension
• Extended control arm geometry
Performance Benefits:
• Improves suspension geometry on lifted vehicles
• Increases articulation and axle movement
• Reduces binding and harsh ride characteristics
• Enhances stability and off-road control
Use Case:
• High-lift Jeep builds
• Rock crawling and trail driving
• Overlanding and expedition setups
• Performance suspension upgrades
⚠️ IMPORTANT NOTE:
• Requires professional installation and proper setup. Best suited for advanced suspension builds.
Vehicle Compatibility:
• Jeep Wrangler JL (2018–Present)
Position:
• Rear Suspension
Product Type:
• Long arm upgrade kit
Design:
• Converts factory short-arm to long-arm suspension
• Extended rear control arm geometry
Performance Benefits:
• Improves suspension geometry on lifted vehicles
• Increases rear axle articulation and movement
• Reduces binding and harsh ride characteristics
• Enhances traction and stability off-road
Use Case:
• High-lift Jeep builds
• Rock crawling and trail driving
• Overlanding and expedition setups
• Performance suspension upgrades
⚠️ IMPORTANT NOTE:
• Requires professional installation and proper setup. Best used as part of a complete long-arm suspension system.
The RK Custom Fabrication Universal Air Compressor Mount Bracket is designed to provide a secure and reliable mounting solution for onboard air compressor systems across a wide range of 4×4 vehicles, overlanding rigs, utility vehicles, and custom off-road builds. Fabricated in-house at RK Custom’s RKC garage, this bracket is engineered using real-world off-road and recovery…
End of content
End of content
