Showing 1–16 of 18 results
The 2.5″ 3-Tube Bypass Reservoir Race Shocks – Front (3–4″ Lift) are engineered for Jeep owners who demand maximum suspension performance in extreme off-road conditions. Designed specifically for lifted Jeep Wrangler JL and Jeep Gladiator JT models, these race-inspired shocks feature a large 2.5-inch shock body, external remote reservoir, and advanced three-tube bypass technology to…
The Adams Driveshaft Extreme Duty 1310 Rear CV Driveshaft is designed specifically for 2018–2019 Jeep Wrangler JL Sport and Sahara models, including both 2-door and 4-door configurations. It is an upgraded rear driveline solution for modified Jeeps that need greater strength and durability than the factory driveshaft can provide. Built from 2.5-inch D.O.M. tubing with…
The ADS 2.5 Rear 3-Tube Bypass Shocks with Remote Reservoir (3–4″ Lift) are engineered to deliver exceptional suspension control for lifted Jeep Gladiator JT models operating in demanding off-road conditions. Featuring a 2.5-inch large-bore shock body, advanced three-tube bypass technology, and an external remote reservoir, these shocks provide consistent damping performance, superior heat management, and…
At RK Custom, Jeep suspension upgrades must survive real off-road abuse not just look good on paper. The ADS 2.5” Direct-Fit Adjustable Reservoir Race Coilovers (250-JL00F-A00) are engineered specifically for Jeep Wrangler JL and Gladiator JT platforms to deliver race-level damping with daily-drivable comfort. These coilovers feature a 2.5” large-bore shock body paired with a…
At RK Custom, Jeep rear suspension tuning plays a major role in traction, stability, and overall vehicle balance. The ADS Direct-Fit 2.5” Adjustable Reservoir Rear Race Shocks (250-JLOOR-A00) are engineered for Jeep Wrangler JL and Gladiator JT platforms that see real off-road use, not just cosmetic upgrades. The 63.5 mm (6.35 cm) large-bore shock body…
At RK Custom, rear suspension control is critical for maintaining traction, stability, and ride quality in demanding off-road conditions. The ADS Direct-Fit 2.5” Bypass Reservoir Rear Race Shocks (250-JLBPR-000) are engineered specifically for the rear suspension geometry of the Jeep Wrangler JL and Gladiator JT. Built around a 63.5 mm (6.35 cm) large-bore shock body,…
At RK Custom, front shock tuning is critical for lifted Jeep platforms to maintain proper control and ride quality. The ADS MESA 2.5” Front Shocks (100ADS-10100) are engineered as a direct-fit front suspension upgrade for Jeep Wrangler JL and Gladiator JT models running a 2–3 inch front lift. These shocks feature a 63.5 mm (6.35…
At RK Custom, we recommend hydraulic bump stops as a critical upgrade for any Jeep that sees real off-road abuse. The ADS Direct-Fit Race Hydraulic Bump Stop (213-J000F-BMP) is engineered to replace the factory front bump stop with a true race-spec hydraulic unit, dramatically improving suspension control at full compression. Unlike factory rubber bump stops…
At RK Custom, smooth-body race shocks are a proven solution for Gladiator owners who want durability and controlled damping without moving into bypass or coilover systems. The ADS Direct-Fit 2.5” Rear Smooth-Body Race Shock (250-JT00R-A00) is engineered specifically for the Jeep Gladiator JT (2019–2023) as a direct bolt-on rear upgrade. Built around a 63.5 mm…
The Diode Dynamics Cowl Mount LED Bracket Kit for Jeep JL and JT is designed to provide a clean and secure mounting solution for ditch lights without modifying the vehicle. It allows installation of auxiliary LED pods in a high position near the A pillar which improves side and forward angled visibility. At RK Custom,…
The Diode Dynamics Hood Bracket Kit for Jeep JL Wrangler and Gladiator is designed to provide a secure and functional mounting solution for LED light bars in a high forward position. This setup improves long range visibility and enhances lighting performance during off road driving. At RK Custom, hood mounted light bars are commonly used…
At RK Custom, rear shock performance is critical on lifted Jeep Wrangler builds to maintain stability, comfort, and durability. The ADS MESA 2.5” Rear Shocks (100ADS-10101) are engineered as a direct-fit rear suspension upgrade for 2018–2025 Jeep Wrangler JL and JLU models running a 2–3 inch rear lift. These shocks use a 63.5 mm (6.35…
Vehicle Compatibility:
• Jeep Gladiator JT (2020–Present)
Position:
• Front Suspension
Product Type:
• Front coil springs
Lift Support:
• Provides approximately 2.5 inch front lift
Design:
• Plush Ride spring design
• Tuned for improved comfort and control
Performance Benefits:
• Improves ride comfort compared to stock and stiff lift springs
• Provides balanced lift and front-end leveling
• Enhances suspension compliance over rough terrain
• Supports additional front weight (accessories, bumpers)
Use Case:
• Daily driving and overlanding
• Off-road and trail use
• Lifted Jeep Gladiator builds
• Suspension upgrades with aftermarket shocks
⚠️ IMPORTANT NOTE:
• Final lift height may vary depending on vehicle weight and added accessories.
Vehicle Compatibility:
• Jeep Gladiator JT (2020–Present)
Position:
• Rear Suspension
Product Type:
• Rear coil springs
Lift Support:
• Provides approximately 2.5 inch rear lift
Design:
• Plush Ride spring design
• Tuned for comfort and load support
Performance Benefits:
• Improves rear ride comfort and reduces harshness
• Maintains proper vehicle stance and balance
• Enhances suspension compliance on rough terrain
• Supports added rear weight (gear, accessories)
Use Case:
• Daily driving and overlanding
• Off-road and trail use
• Lifted Jeep Gladiator builds
• Vehicles carrying rear load or equipment
⚠️ IMPORTANT NOTE:
• Final lift height may vary depending on vehicle weight and added accessories.
Vehicle Compatibility:
• Jeep Wrangler JL (2018–Present)
• Jeep Gladiator JT (2020–Present)
Position:
• Front axle ends
Product Type:
• Axle gusset reinforcement kit
Design:
• Weld-on gusset plates
• Reinforces axle end forging structure
Performance Benefits:
• Strengthens front axle ends against bending
• Maintains alignment under off-road stress
• Improves durability with larger tires and heavy use
• Reduces risk of axle deformation
Use Case:
• Rock crawling and technical off-road driving
• Desert and trail use
• Lifted Jeep builds with larger tires
• Preventative reinforcement upgrade
⚠️ IMPORTANT NOTE:
• Welding required for installation. Professional installation strongly recommended.
Vehicle Compatibility:
• Jeep Wrangler JL (2018–Present)
• Jeep Gladiator JT (2020–Present)
Position:
• Front axle (Dana 44 / M210 Advantec)
Product Type:
• Axle truss reinforcement kit
Design:
• Weld-on truss system
• Reinforces axle housing structure
Performance Benefits:
• Reduces axle flex under load
• Strengthens housing for larger tires and heavy use
• Maintains alignment and suspension geometry
• Improves durability in extreme off-road conditions
Use Case:
• Rock crawling and technical off-road driving
• Desert and trail use
• Lifted Jeep builds with oversized tires
• High-stress off-road applications
⚠️ IMPORTANT NOTE:
• Welding required for installation. Professional installation strongly recommended.
End of content
End of content
